Available in disk or cylindrical scrub decks. All versions are built upon the same platform. Version numbers reflect scrub path. Scrubbers are designed with solution and brushes off in neutral. A variable pressure actuator positions the scrub deck on the floor. Solution and recovery tanks hold 26 gallons. This is a 24 volt system.
Steel cowlings protect the scrub deck. There is a heavy use of stainless steel for low maintenance. It is easy to operate. Run time is about 2.5 hours. Note the blue hose and pressure sprayer available as an option. It can pre spray an area or wash out the scrubber using soap solution.
DISK VERSIONS : Disk
scrubbers wash and or strip wax from the floor. Disk
machines offer easy to change, variably aggressive, pads
or brushes.
CYLINDRICAL VERSIONS: Cylindrical scrubbers sweep solid debris into a tray while also washing the floor. You eliminate pre sweeping the floor for greater productivity.
How Can A Scrubber Save Your Organization Money
?
|
AREA |
TIME REQUIRED TO CLEAN |
||
|
Sq Ft. |
By Hand |
Model 290 |
Weekly Savings |
|
10,000 |
7 hrs |
0.5 hrs |
$252.00 |
|
25,000 |
17 hrs |
1 hrs |
$636.00 |
|
75,000 |
50 hrs |
2.5 hrs |
$1,900.00 |
|
100,000 |
70 hrs |
3.5 hrs |
$2,544.00 |
Serving Wisconsin And The Upper Peninsula